For the reason that screen of iPhone 6 plus has been enlarged to 5.5 inches, the possibility of breaking it has also been enlarged. If unfortunately you broke your iPhone 6 plus display screen, official restore will cost you as much as a week exclude the time you make the appointment. So in case you are skilled sufficient, replacing the iPhone 6 plus damaged display yourself is a greater alternative. Here we will stroll you through a 5 minutes DIY repair guide for changing the damaged iPhone 6 plus damaged display screen.

Cracked the iPhone 6 screen? No fear! Just comply with this step-by-step iPhone 6 display replacement guide, it is only a ten mins work!

Please be aware: This process was achieved by our consultants who've years of expertise of take apart telephones, and we used the half which already have those small components pre-assembled. This submit is in no way a reference for those who're expert sufficient to repair their iPhone 6+, do this at your individual risk, etradesupply is not going to be liable for any damage happened throughout the repair process.

Instruments Needed:
Pentalobe Screwdriver
PH00 Philip Screwdriver
A Pair of Tweezers
Suction Cup Tool
Case Opening Software

Step 1. Shut down your iPhone 6 plus before you do anything. (Make sure you’ve executed this before the disassembly begins, or you could cause brief circuit of the inside components of the cellphone which can hurt the motherboard)

Step 2. Undo 2 screws on the bottom with the help of the Pentalobe Screwdriver. (We recommend you to make use of a magnetic pad for placing these screws in case shedding them)

Step 3. Stick the suction cup on the underside of the telephone after which pull out the damaged screen. (In case your screen has already shattered badly, use transparent adhesive tape to cowl the floor of the screen to keep away from any additional harm)

Step 4. Undo 5 screws holding the metallic cowl, then take the metal cowl out.

Step 5. Disconnect the digitizer flex cable connector, LCD show flex cable connector, front dealing with digicam connector and house button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD display meeting with dwelling button, frame and front dealing with digicam, then you definitely just need to place the new one on)

Step 6. Undo the three screws holding the home button retaining bracket then choose it up.

Step 7. Pry up the house button flex cable connector then remove the home button.

Step 8. Undo the 3 screws that holding the metallic cowl on the ear speaker.

Step 9. Take out the retaining bracket, ear speaker and entrance going through digital camera.

Step 10. Undo the 7 screws that locking the LCD metallic plate.

Step 11. Pry up the LCD back plate connector.

Step 12. Substitute your broken display with the brand new one.

Word: We strongly recommend you to test the function of the brand new iPhone 6 plus digitizer and China Resun LCD display assembly before you install it on. If you happen to unfortunately get the defective half, you could possibly ask your supplier to exchange for a brand new one.